Mettler Toledo RS-P25 Manual De Instrucciones página 17

Connected.Device. Device.Settings:
HG63, HR83 Select on LocalCan Swit-
chbox: 1 Printer, Baud-
rate:9600; Bit/Parity:8 Bit
No, Handshake: Xon/Xoff
Russian Select on LocalCan Swit-
chbox: 1 Printer, Baud-
rate:9600; Bit/Parity:8 Bit
No, Handshake: Xon/Xoff
and language Russian
QB1 Factory settings
SQC XP Printer Mode
SQC16 Printer Mode
T50, T70, T90 USB compact printer
V20, V30, C20, C30 USB compact printer
DL15, DL22, DL28 RS-P42
DL31, DL38, DL32, GA42
DL39
DE40, DE45, DE51, GA42
RE40D, RE50, DR40,
DR45
Refracto 30PX/GS, PrinterMode and Baudrate
Densito 30PX 9600
SevenEasy S20, S30, Factory settings
v 1.30 or higher
SevenMulti S40, S47, Baudrate:9600; Bit/Pari-
S50, S70, S80, ty:8 Bit No, Handshake:
v1.1 or higher Xon/Xoff
SevenGo pro SG6, Factory settings of the RS-
SG7, SG8 232 Infrared device
*The Printer detects automatically the settings of the connected device. Therefore disconnect the Printer of the con-
nected device and reset the Printer to set the factory settings again: Baudrate:9600; Bit/Parity:8 Bit No, Handshake:
Xon/Xoff
Printer.Settings:
*Reset
Auto baudrate off, Balan-
cefeature off
*Reset
Auto baudrate off, Balan-
cefeature off,
CharSet IBM/DOS Cyrilic
Factory settings
Factory settings
*Reset, Auto baudrate off RS-P25
Factory settings
Factory settings
*Reset
Auto baudrate off,
Balancefeature off
Auto baudrate off, Balan-
cefeature off,
Baudrate:1200; Bit/Pari-
ty:8 Bit No,
Handshake: None
Auto baudrate off, Ba-
lancefeature off,
Baudrate:1200; Bit/Pari-
ty:8 Bit No,
Handshake: Hardware
Auto baudrate off, Balan-
cefeature off,
Baudrate:9600; Bit/Pa-
rity:8 Bit,
Handshake: Hardware
*Reset
Auto baudrate off, Balan-
cefeature off
*Reset, Auto baudrate
off,
Balancefeature off
Auto baudrate off Baud-
rate:1200;
Bit/Parity:8 Bit No
Handshake: off
Printer P25, P26, P28
Compatible.Printer.Models
RS-P25
RS-P25
RS-P25
USB-P25
USB-P25
RS-P25 (Connect with RS9
F/F Cable Order number:
51190362)
RS-P26 (Connect with RS9 F/F
Cable Order number:
51190362)
RS-P26 Connect with RS9
F/F Cable (Order number:
51190362)
RS-P26
RS-P26, RS-P25
RS-P25, RS-P26
RS-P26
Datatransfer of SevenGo pro
to the printer occurs via the
Infrared-RS-232 adapter (Order
number: 51302333)
1