Introduction; Capabilities Of The P25, P26, P28 Printer; Overview Of Functions; Startup.PRocedure - Mettler Toledo RS-P25 Manual De Instrucciones

1

Introduction

1.1 Capabilities of the P25, P26, P28 Printer

This Printer is a simple to operate dot matrix printer for METTLER TOLEDO instruments. The printout
on normal paper meets the requirements of modern quality assurance systems (GLP, GMP, ISO
9001, etc.). These norms define the principles and user requirements related to measuring and test
instruments. The Printers complie with the requirements of measurement traceability by precisely
documenting the origin of data, as well as calibration procedures. It meets the requirement of
archiving measurement results by providing a thermally stable and light resistant printout.

1.2 Overview of Functions

Auto bauderate detection
Balance feature "on/off"
USB Interface
RS232 Interface
Zero / Tare button
Date / Time
Statistics / Totaling
* USB has standard settings
Auto baudrate detection: The Printer detects the settings of the connected device every time it
1)
is switches on/off by the key. Switch this feature off if the connected device has this feature not
implemented (see section 8).
Balance feature "on/off": This feature disables the keys on the Printer (see section 8).
2)
2 Startup Procedure

2.1 Safety Measures

The Printer has been tested for the connections and intended purposes documented in these
Operating Instructions. However, it is your responsibility to perform the necessary tests related to
the methods and purposes of its intended use. Therefore, you should observe the following safety
measures.
• The Printer must be used indoors only, and never in hazardous areas.
• The electronics of the Printer are protected against the ingress of splashing water
and dust. However, since the printer housing is not watertight, the printer should
not be used in the presence of liquids.
• Comply with cleaning instructions (see section 6.3), protect power plug against
wet conditions.
• Never open the printer housing. If you have any problems with your printer, please
contact your responsible METTLER TOLEDO service.
1)
2)
RS-P25 USB-P25
 *
 *
– 
 –
– –
– –
– –
Printer P25, P26, P28
5
RS-P26 RS-P28
 
 
– –
 
 
 

–