Publicidad
Using the Radio Data System (RDS)
(continued)
3
Within 6 seconds, press the TUNING (
button to select the programme type.
Each time the button is pressed, the programme type will
appear.
4
While the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 sec-
onds, "SEARCH" will appear, and the search operation will
start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 8 sec-
onds, and then the station name will remain lit.
● If you want to listen to the same programme type of
another station, press the RDS PTY button while the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, "Not Found" will appear for
4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP"
will appear.
(This does not mean that you can listen to the traffic infor-
mation at that time.)
When the traffic information is broadcast, "TA" will appear.
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
NEWS
POP M
AFFAIRS
ROCK M
INFO
EASY M
SPORT
LIGHT M
EDUCATE
CLASSICS
DRAMA
OTHER M
CULTURE
WEATHER
SCIENCE
FINANCE
VARIED
CHILDREN
or
SOCIAL
FOLK M
RELIGION
DOCUMENT
PHONE IN
TEST
TRAVEL
ALARM
LEISURE
NONE
JAZZ
TP
COUNTRY
TA
NATION M
OLDIES
Timer and sleep operation (Remote
control only)
Timer playback:
)
The unit turns on and plays the desired source (CD, TUN-
ER, USB, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (" " indicator):
Once timer play works for one time only at a preset time.
Daily timer ("DAILY" indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio pro-
gram, and use the daily timer to wake up.
1
Set the daily and once timer (pages 14 - 15).
1 minute or more
Daily timer
Start
Stop
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6). If it is not set, you cannot use the timer function.
● For timer playback: Plug in USB or load discs to be
played.
1
Press the ON/STANDBY button to turn the power on.
2
Press the TIMER button.
3
Press the
"Daily", and press the ENTER button.
4
Press the
Set", and press the ENTER button.
5
To select the timer playback source (CD, TUNER,
USB, AUDIO IN), press the
Press the ENTER button.
When you select the tuner, select a station by press-
ing the
or
ENTER button. If a station has not been programmed,
"No Preset" will be displayed and timer setting will be
cancelled. To memorise a station, refer 'Memorising a
station' on page 12.
6
To adjust the day, press the
and then press the ENTER button.
7
Press the
and then press the ENTER button.
8
To adjust the minutes, press the
button and then press the ENTER button.
9
Set the time to finish as in steps 7 and 8 above.
10
To adjust the volume, press the
ton and then press the ENTER button.
11
Press the ON/STANDBY button to enter the power
standby mode. "TIMER" indicator lights up.
E-14
Once timer
Start
or
button to select "Once" or
or
button to select "Timer
or
button, and then press the
or
or
button to adjust the hour,
or
or
Stop
button.
button
but-
Publicidad
