Function Locking; Communication With Wika-Cal Calibration Software; Activating Wika-Wireless In The Gdi-100-D - WIKA GDI-100-D Manual De Instrucciones

6. Commissioning, operation

6.3.8 Function locking

Access to adjustable parameters can be selectively turned off, once set, to prevent
unauthorized changes to configuration.
Locking the Zero button
The operator can no longer make a "ZERO" using the keypad - it is still possible over the
wireless transmission.
Locking the Menu button
Access to the "Menu" is locked. If "ZERO" is not locked, this can still be executed. Over
the wireless transmission, all settings can still be read or written.
Instrument write protection (not available for SF₆ units)
When this lock is set, via the menu on the local display menu as well as over the wireless
transmission, access to the settings is read-only - thus no alteration of the settings is
possible.
If the "ZERO" lock is not set, the "ZERO" function is still possible.
The individual locks can only be set via WIKA-Cal calibration software over the wireless
transmission. For this, the input of a 4-digit PIN is required. This is set to "0000" on supply
and can be changed.
6.4

Communication with WIKA-Cal calibration software

As soon as a connection exists over WIKA-Wireless, it can communicate with the
WIKA-Cal calibration software. It can transmit and evaluate live measurements or also
measurements that have already been made, without difficulty.

6.4.1 Activating WIKA-Wireless in the GDI-100-D

1. Press the Menu button.
2. Press and hold the ▶ or ◀ button until the "Wireless" default setting appears in the
matrix field.
3. Switch on wireless by pressing the ▼ or ▲ button.
4. Confirm the setting by pressing the Menu button.
⇒
Once wireless has been switched on, the WIKA-Wireless symbol blinks in the
display
⇒
The WIKA-Wireless symbol is lit continuously when a connection has been
created.
WIKA operating instructions, model GDI-100-D
EN
25