Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Connecting the aspiring filter:
Install the supplied aspiration filter in the tip of the aspiration hose. Insert the filter
fitting in the hose and fix it with a clamp as shown in the figure below.
NOTE: Never operate
the
pump
without
the
object is absorbed into the
pump it could cause the
blocking of the turbine
resulting
in
serious
breakage in the pump or
even in the engine.
4.4 Using CAMLOCK type quick connectors (not included):
You can replace the provision included in the machine (nipple-nut-seal) to install
CAMLOCK quick connectors (not included), then screw the CAMLOCK connector on
the pump outlet thread directly and using Teflon to guaranty airtightness, this type of
connector allows you to connect or disconnect hoses quickly and safely. GENERGY
has CAMLOCK closures for connections of their motor pumps, consult your dealer.
CAMLOCK CONNECTION EXAMPLE
FOR ASPIRATION AND DISCHARGE
CAMLOCK CONNECTION EXAMPLE FOR
JOINING HOSE SECTIONS
34
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
