If you were unable to start up in the first try, repeat the operation.
NOTE: If you reach the end of the rope length abruptly you could damage the
handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from hitting
the machine. Move your hand along with the handle until it has coiled back
completely.
NOTE: Never pull the rope again if the engine is already running and turning.
6 Once started wait for a few seconds and then turn the choke lever to the left (open
air position). The engine will begin working stably and is ready to have equipment
plugged in.
NOTE: Do not leave the choke in an intermediate position, the blend would be
too rich and the engine would not work properly.
.
7 Adjust the throttle as the needed water flow. Only use maximum acceleration to
start the aspiration and only on specific short periods of time, for a constant work hold
the accelerator between the 25% and 75%.
CHOKE
THROTTLE
41