Horizon Global 118882 Instrucciones De Instalación página 3

Always wear SAFETY GLASSES
when installing wiring harness
1. Open the rear hatch. Locate the plastic mount covers that
are covering the taillight mounting screws. Using a trim
panel tool or screwdriver, carefully remove the covers.
Be careful not to break mounting tabs.
©2023 Horizon Global™ Corp
Installation Instructions
PART NUMBER: 118882
3. Locate the taillight wiring connectors on both driver's side and passenger
side. Disconnect the vehicle wiring harness from both taillight sockets being
careful not to break the locking tabs, set taillights a side.
2. Using a Phillips Screwdriver or 10mm socket, remove the
mounting screws on both driver's side and passenger side
(3 per side). Carefully pull the taillight away from the
vehicle exposing the vehicle's taillight wiring harness.
Repeat process for passenger side.
Sheet 3 of 24 118882-NP 1/20/2023 Rev. A