Dremel 8220 Instrucciones De Funcionamiento Y Seguridad página 17

1600A01RP1.qxp_8220 4/16/19 3:01 PM Page 17
DREMEL CHARGER
876 OR GAL12V-20
Plug charger cord into your standard power
outlet, then insert battery pack into charger.
If the indicator lights are "OFF", the charger
is not receiving power from power supply
outlet.
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
The battery pack may be used even though
the light may still be blinking. The light may
require more time to stop blinking depending
on temperature.
The purpose of the blinking green light is to
indicate that the battery pack is fast-
charging. It does not indicate the exact point
of full charge. The light will stop blinking in
less time if the battery pack was not
completely discharged.
GREEN
LIGHT
876
Charging Battery Pack
If the green indicator light is "ON", the
charger is plugged in but the battery pack is
not inserted, or the battery pack is fully
charged, or the battery pack is too hot or cold
for
automatically switch to fast-charging once a
suitable temperature is reached.
When charging several batteries in sequence,
the charge time may slightly increase.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool.
BATTERY
PACK
CHARGER
17
fast-charging. The
CHARGER SYMBOLS AND MEANING –
MODEL 876 ONLY
Green indicator
light is "BLINKING".
GAL12V-20
charger will
Green indicator
light is "ON".
BATTERY
PACK
CHARGER
GREEN
LIGHT