Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions
Before using the battery charger, read all the instructions and
cautionary markings on (1) the charger, (2) the battery, and
(3) on the radio's manual.
Operational Safety Guidelines
•
Turn the radio off when charging battery.
•
This equipment is not suitable for outdoor use. Use only in
dry locations/conditions.
•
Make sure the cord is located where it will not be stepped
on, tripped over, or subjected to water, damage or stress.
The Kit includes two single-unit charger base, two charger
pockets for T82 Series, two charger pockets for T62 Series,
and two single-cable micro-USB power supply.
Charging Instruction
1. Turn the radio off.
2. Insert battery to radio by following the instructions in radio's
user manual.
3. Close the battery door.
4. Plug desired charger pocket to charger base. Refer to Table
1 for correct charging pocket to use.
Figure 1: Removing and attaching Charging Pocket
5. Plug the power supply Micro-USB connector to charger
base.
6. Plug the power supply into a standard wall outlet.
7. Put the radio into charger pocket.
8. Charging indicator displays on radio screen.
9. The T82 Series and T62 Series radios are fully charged
within 8 hours for 800 mAh battery.
Note: When the battery level is extremely low, it might take some time for
the radio to start display charging indicator on screen.
Note: For optimal battery life, do not store the radio or battery in the charger
after charging is completed.
Please ensure that the proper charging base
and adaptor are used together. This is noted on
!
the label at the bottom of the charger base. The
compatibility in Table 1 can also be consulted.
C a u t i o n
1
Publicidad
