Important Safety Instructions - Motorola Solutions PMLN7093 Guia Del Usuario

English
To reduce risk of injury, charge only the rechargeable Motorola Solutions
authorized batteries listed in Table 2. Other batteries may explode, causing
personal injury and damage. Use of accessories not recommended by
Motorola Solutions may result in risk of fire, electric shock, or injury.
C a u t i o n

IMPORTANT SAFETY INSTRUCTIONS

This document contains important safety and operating instructions. Please read
these instructions carefully and save them for future reference.
Before using the battery charger, read all the instructions and cautionary
markings on (1) the charger, (2) the battery, and (3) the radio using the battery.
1. To reduce risk of damage to the electric plug and cord, pull the plug rather than the
cord when disconnecting the charger.
2. An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in risk of fire and electric shock. If an extension
cord must be used, make sure that the cord size is 18 AWG for lengths of up to
6.5 feet (2.0 m), and 16 AWG for lengths up to 9.8 feet (3.0 m).
3. To reduce risk of fire, electric shock, or injury, do not operate the charger if it has
been broken or damaged in any way. Take it to a qualified Motorola Solutions
service representative.
4. Do not disassemble the charger – it is not repairable and replacement parts are not
available. Disassembly of the charger may result in risk of electric shock or fire.
5. To reduce risk of electric shock, unplug the charger from the AC outlet before
attempting any maintenance or cleaning.
OPERATIONAL SAFETY GUIDELINES
This is Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
WARNING
• Turn off the radio when charging the battery.
• This equipment is not suitable for outdoor use. Use only in dry locations/conditions.
• Connect equipment only to an appropriate power cord with the correct voltage (as
specified on the product).
• Disconnect from line voltage by removing the power plug from the outlet.
• The socket outlet that this equipment is connected should be close and easily
accessible.
• In equipments using fuses, replacements must comply with the type and rating
specified in the equipment instructions.
• Maximum ambient temperature around the charger must not exceed 40 °C
(104 °F).
1