Technical Specifications
Charge times
Maximum Solar Input
Goal Zero Ranger 300
Goal Zero Boulder (3X) 200 Briefcase
Goal Zero Boulder (6X) 200 Briefcase
Battery:
Cell Chemistry
Pack Capacity
Lifecycles
Shelf-life
Wall Charge Time
Ports:
Input
AC Input
High Voltage DC
Low Voltage DC
Input/Output
Power+ Port
Expansion Port
Output
3x USB-A
3x USB-C
1x 12V High Power Port
2x 12V 6mm port
1x 12V Car Port
4x AC 20A
1x AC 30A
*Max of 30 Amps shared across all 12V output ports.
**Shared across all 5 AC ports, 20A and 30A
NOTE: All DC outputs are regulated.
16
1.7 hrs
15.7 hrs
7.8 hrs
3.9 hrs
LiFePO
(Lithium Iron Phosphate)
4
3993.6Wh (51.2V 78Ah)
4000 (0.5C discharge, climate controlled,
80% original capacity.)
Charge every 12-18 months (in "main power off" state)
0-100% in about 3 hours at 1800W
1800W (120V AC, up to 15A)
3000W Max (13.3-145V DC, up to 40A)
275W Max (13.3-28V DC, up to 10A)
Input: 120V AC, up to 15A(1800W)/
240V AC up to13A(3000W max)
Output 3600W AC (120V AC, up to 30 A)
To be used with Goal Zero Expansion Modules such as
the Tank PRO 4000 (100A, 56V DC Max)
18W Max Individually, 54W combined
2x at 30W Max, 1x at 100W Max, 160W combined
405W Max (13.5V DC, up to 30A)*
135W Max (13.5V DC, up to 10A)*
162W Max (13.5V DC, up to 12A)*
2400W (120V AC) Max per port, 3600W continuous
shared**, 7200W Surge
3600W Max (120V AC), 7200W Surge
General:
Expandable
Yes (Up to four Tanks per Yeti Pro 4000)
Simultaneous charge and discharge
Yes
SKU
37500 (120V)
Weight (Yeti only)
115.74 lbs (52.5 kg)
Weight (with Cart)
125.73 lbs (57.03 kg)
Dimensions (Yeti only)
21.4 x 13.8 x 14.8 in (54.36 x 35.05 x 37.59 cm)
Dimensions (Yeti & Roll Cart)
21.4 x 13.8 x 18.1 in (54.36 x 35.05 x 45.9 cm)
Operating Usage Temp.
Charge: 32° to 104°F (0° to 40° C)
Discharge: -4° to 104°F (-20° to 40°C)
Certs
UL 2743, IEC 62368, UL/IEC 62133, UN 38.3
Limited Warranty
5 years*
* For warranty terms, conditions, and registration go to www.goalzero.com/warranty
To request a physical copy of the warranty call 1-888-794-6250.
For Patents, please see https://www.goalzero.com/pages/ip
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, induding interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. To maintain-compliance
with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your body.
EU DECLARATION OF CONFORMITY
Hereby, Goal Zero declares that the radio equipment type Yeti PRO 4000 (37500) is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: https://www.goalzero.com/pages/user-guides
17