GOAL ZERO YETI PRO 4000 Guia Del Usuario página 6

Set Up With Other Goal Zero Products
FOR HOME USE
If you plan to use the Yeti PRO 4000 with the Haven 10 Manual Transfer Switch
smart energy panel, please reference the Haven 10 User Guide or visit our website
at goalzero.com for additional information.
FOR VAN/RV USE
If you're installing this in a vehicle, please reference the Installation Guide for the
Escape Ecosystem or visit our website at goalzero.com for additional information.
Setting Up Your Yeti PRO 4000
1. PLUG YOUR YETI PRO 4000 INTO THE WALL TO BEGIN CHARGING YOUR
POWER STATION.
2. PRESS THE MASTER POWER BUTTON TO TURN IT ON.
NOTE: The same button will shut down the unit. If hot, fans may continue for a few
moments before it completely powers off. You can leave the power on in between
uses, but we suggest powering off the unit if it will not be used for an extended
period of time. We recommend making sure the battery is fully charged every 12-
18 months.
6
NOTE: The display will hibernate after 20 minutes of inactivity (when not charging
or discharging). Re-illuminate by pressing the backlight button.
3. DOWNLOAD THE GOAL ZERO APP AND UPDATE YOUR DEVICE
The Goal Zero app makes it easy to control your Yeti PRO 4000, adjust settings,
and monitor your power usage. Download it from your app store, then follow the
instructions in the app to pair with Wi-Fi and set up your power station.
The app will also prompt you with any new firmware updates. Please make these
updates before using your device for optimal performance.
7