GOAL ZERO YETI PRO 4000 Guia Del Usuario página 7

Powering Your Devices
Once the master power button is on, press the button above the output port you
will be using and plug your device(s) into the desired port.
The output ports on the back of the unit are also controlled by the output port
buttons on the front of the power station.
8
Using Your Product
Charging Your Yeti
Grid Charging
To charge your Yeti PRO 4000, insert the AC charging cable into the AC fast
charge port on the back of the power station. Then plug the other end of the cable
into your wall outlet.
You will see a blue plug icon illuminate on the display. Once the charge is active,
you'll also see a blue blinking light near the input. These lights indicate that the unit
is charging. The display will also show you your battery state of charge, input Watts
and your battery time to full.
NOTE: When the master power button is off, the Yeti PRO 4000 will charge but it
will not output power to other devices.
The Yeti PRO 4000 can charge from 0% to 100% in under three hours.*
*Your device will be shipped in the 'Low' Charge Speed setting to prevent circuit
load issues. You can slide the Charge Speed switch on the back of your device
to 'High' to charge your power station faster. The Low charge speed can be
customized in the Goal Zero app.
When charging from the grid you can charge the power station at up to 1800W.
AC Input
9