Downloaded by: pd-oliana on 11-08-2022 17:37 CEST
English
JAR BLENDER
OPTIMA PURE 1500
DESCRIPTION
A
Cup
B
Lid
C
Sealing lid ring
D
Jar
E
Blade set
F
Sealing Blade ring
G
Jar base
H
Motor body
I
Speed selector knob
J
Pulse function / Picahielos
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance while the jug is empty.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Do not force the appliance's work capacity.
- Respect the MAX level indicator. (1500 ml).
- When using hot liquids do not fill the jug more
than half way. At all times, when mixing hot
liquids in the jug, select the slowest speed on
the speed selector.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the appli-
ance from operating correctly.
- Never use liquids that are boiling or ingredients
whose temperature exceeds 80ºC.
- Do not use the jar immediately after taking it
out of the dishwasher or the refrigerator, ensure
that the jar is at room temperature.
- Check that the lid is closed properly before
starting the appliance.
- Do not use the appliance for more than 2
minutes at a time. In case of operate in cycles;
allow the appliance a resting period of at least
2 minutes between each cycle. Under no cir-
cumstances should the appliance be operated
for more time than necessary.
- Do not use the appliance with frozen goods or
those containing bones.
- CAUTION: Do not use the appliance if the
glass is cracked or broken.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
- Extend the cable completely before plugging
it in.
- Ensure the blade fixing ring is fixed properly
to the jar (by turning counter clockwise) before
putting on the motor body. (Fig.1).
- Place the jar onto to the motor unit until it fits
properly into place (Fig.2).
- Put the ingredients, after having first chopped
them into small piece, into the jar with liquid (do
not exceed the maximum marker).
- Put the lid on the jar; make sure it is properly
fixed in place.
- Put the cup in the lid.
- Connect the appliance to the mains.
- The pilot light comes on.
- Turn the appliance on, by using the selection
knob.
- If you wish to add more ingredients pull out the
cup.
- Add the ingredients and replace the cup.