Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Align the driver side deflector with the previously
cleaned door frame.
3
With the deflector in its final position, remove remaining
tape liner by pulling on free ends.
5
4 Piece Set
The rear visor mounts to the door frame utilizing the same installation procedure as above.
7
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Window Shade should be cleaned periodically with a mild liquid soap or plastic cleaner. Solvents
or cleaners not intended for plastic may cause fading, fogging or scratches to the surface and
should not be used. A nonabrasive wax may be applied for increased protection.
NOTE: Actual application may vary slightly from illustrations.
Repeat for opposite side. (See Steps 3,5, and 6)
vertical post
Suggested Care and Maintenance of
©Copyright Ford 2018
Slide the front end flange under the mirror cap.
4
Apply pressure along the flange edges to secure in
6
Repeat steps 1 thru 6 for passenger side front
rear visor installed to trim
Window Shade
800-241-7219
Page 2 of 2
place.
deflector
Publicidad
