Descargar Imprimir esta página

Grandstream GWN7806-GWN7806P Guía De Instalación Rápida página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
OVERVIEW
EN
The GWN7806(P) is layer 2+ managed switch that allows small-to-medium enterprises to build scal-
able, secure, high performance and smart business networks that are fully manageable. It supports
advanced VLAN for flexible and sophisticated traffic segmentation, advanced QoS for prioritization
of network traffic, IGMP/MLD Snooping for network performance optimization, and comprehensive
security capabilities against potential attacks. The GWN7806P provides smart dynamic PoE output to
power IP phones, IP cameras, Wi-Fi access points and other PoE endpoints. GWN7806(P) is easy to
deploy and manage, including managed by the local Web user interface of the GWN7806(P) switch
and CLI, the command-line interface. The switch is also supported by GWN.Cloud and GWN Manager,
Grandstream's cloud and on-premise network management platform. The GWN7806(P) is the best
value enterprise-grade managed network switch for small-to-medium businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for operation and -10 °C to
60 °C for storage.
• Do not expose this device to environments outside of the following humidity range: 10-90% RH (non-
condensing) for operation and 10-90% RH (non-condensing) for storage.
• Do not power cycle your GWN7806(P) during system boot up or firmware upgrade. You may corrupt
firmware images and cause the unit to malfunction.
PACKAGE CONTENTS
1x GWN7806(P) Switch
1x Power Cord Anti-Trip
1x 1.2m (10A) AC Cable
PORTS & LED INDICATORS
Front Panel
2
1
Back Panel
Side Panel
11
1x Quick
4x Rubber
1x 25cm Ground
Installation Guide
Footpads
Cable
2x Rack Mounting Kits
8x Screws (KM 3*6)
4
3
9
8
~ 1 ~
No.
Port & LED
1
Port 1-48
2
1-48
3
Port SFP+ 49-54
4
SFP+ 49-54
5
Console
6
RST
7
SYS
8
9
100-240VAC 50-60Hz
10
11
Fan
LED Indicator
LED
Status
Indicator
Off
Solid green
Flashing green
Solid blue
System
Indicator
Flashing blue
6
7
Solid red
Flashing red
5
Off
Solid green
Flashing green
10
Port
Indicator
Solid yellow
Flashing yellow
Alternately flashing yellow and green
Description
48x Ethernet RJ45(10/100/1000Mbps), used for connecting
terminals
Note: GWN7806P Ethernet ports support PoE/PoE+
Ethernet ports' LED indicators
6x 10Gbps SFP+ ports
SFP+ ports' LED indicators
1x Console port, used to connect a PC directly to the switch
and manage it.
Factory Reset pinhole Press for 5 seconds to reset factory
default settings
System LED indicator
Power cord anti-trip hole
Power socket
Grounding terminal
3x Fans
Description
Power off
Booting
Upgrade
Normal use
Provisioning
Upgrade failed
Factory reset
For all ports, port off & For SFP+
ports, port failure
Port connected and there is no
activity
Port connected and data is
transferring
Ethernet port connected and PoE
powered
Ethernet port connected, data is
transferring and PoE powered
Ethernet port failure
~ 2 ~

Publicidad

loading