Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Control Panel
When the cooking surface is connected
to the electricity mains, the indicator light
should light up briefly next to the child lock
sensor field (7), after which the hob can be
switched on.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
Switch on the appliance
When the appliance is switched off then all
the cooking zones are disconnected and the
indicators are off.
Touch the on/off sensor field (1) to switch on
the appliance. "0" will appear on all cooking
zone displays (3) for 10 seconds. Select cook-
ing zone by touching cooking zone selection
sensor field (2) and then touch the setting
selection sensor field (4) to set the desired
heat setting (see Selecting the cooking
zone heat setting).
If none of the sensor fields is touched within 10 seconds, the appliance
switches itself off.
If child lock function is activated, the appliance cannot be switched on (see
"Releasing the child lock").
Switch on the cooking zone
After switching on the appliance using the
on/off sensor field (1) cooking zones can be
operated as follows:
1. Select the desired cooking zone using the
cooking zone selection sensor field (2).
(Sensor field layout reflects the layout of
individual cooking zones),
2. To select the desired heat setting, touch
the setting selection sensor field (4).
3. To change the heat setting again as
described in point 1, select the desired
cooking zone using the cooking zone
selection sensor field (2), and then touch
the heat setting sensor field (4).
If none of the sensor fields is touched within 10 seconds, the cooking zone
switches off.
A cooking zone is active when a dot is displayed by the number " " on the
cooking zone display. This indicates a cooking zone is ready for the heat set-
ting to be set or changed.
1
2
1
4
4
2
3
1
2
39
3
2
3
4
2
3
7
1
Publicidad
