Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the ejection channel and the
magazine
Clean the ejection channel, sleeve and the
■
guide rail in the magazine regularly to reduce
the risk of jams and to prevent increased wear.
Lightly oil the moving parts and wipe off the
■
excess oil.
Cleaning the housing
Clean the housing with a clean dry cloth.
■
We recommend to use Würth plastic cleaners
■
and Würth plastic care products.
Remove heavy soiling (dust etc.) using a soft
■
brush.
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
enquiries or spare parts orders, always quote the
item number as given on the device type plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Environmental instructions
Electrical power tools, accessories and packaging
should be sorted and submitted to an environmental-
ly-sound recycling facility.
EU countries only:
Do not dispose of your power tool
with the household waste.
In accordance with the European
Directive 2002/96/EC on Waste
Electrical and Electronic equipment
and its implementation into national
law, electrical devices that are no longer usable
must be collected separately and routed to an envi-
ronmentally-friendly recycling/recovery chain.
Batteries:
Do not dispose of batteries in household waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
EU countries only:
In accordance with Directive 2006/66/EC defec-
tive or worn-out batteries must be recycled.
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
With any
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Warranty
147
Publicidad
