Celestron TRAVEL SCOPE 60 DX Guía De Instalación Rápida página 4

USING THE
Smartphone Adapter
1
Open the eyepiece clamp and place it around the body
of the eyepiece. Tighten the clamp until it's secure.
4
Loosen the knob on the bottom of the adapter that
secures the phone clamp to the eyepiece clamp. Slide
the phone clamp up and down and rotate it left and
right until your camera is looking down through the
eyepiece of the telescope. Tighten the knob on the
bottom of the adapter to secure it in place.
2
Use the phone clamp knob to open the phone holder
so that your phone fits inside. Tighten it to secure your
phone in place.
5
Use the telescope's focuser to adjust focus of your
camera. Snap the image using your app.
3
Turn on the phone and open your camera app. Make
sure the flash is turned off.
ENGLISH | 3