bASIC CONFIGURATION
To setup Video/Audio
You can set the video resolution, quality, frames per second, and input gain.
1
Click <BASIC> <VIDEO & AUDIO>.
The VIDEO & AUDIO window appears.
2
To complete the video setting,
click the [Apply] button.
The settings are saved.
You will not be able to hear the audio
data if the audio input gain is at zero.
<Resolution>: Select a video size from the options shown below.
mJPEG: QXGA(2048x1536), UXGA(1600x1200), SXGA(1280x1024)
mPEG: VGA(640x480)
<Quality>: Select a video quality from <Very High>, <High>, <Normal>, <Low> and <Very Low>.
<Frame Rate>: Select a frame rate.
mJPEG: QXGA(12ips, 6ips, 3ips, 1ips, Auto), UXGA(19ips, 10ips, 5ips, 1ips, Auto),
mPEG: 3ips, 1ips
<Input Gain>: Select the audio amplification level between 0 and 10
If the frame rate of MJPEG is at its maximum value, the frame rate of MPEG can only be set to
3 ips or 1 ips.
SXGA(25ips, 13ips, 6ips, 1ips, Auto)
_43
Setting Up