HK Audio POLAR 10 Manual Del Usuario página 5

Channel 3 (Instrument)
Use this input to connect an instrument with high-impedance (Hi-Z) output
signals such as an electric or acoustic guitar or bass or an electric piano.
The high-impedance input stage renders the instrument's full tonal and
dynamic range.
●
6
Input
Connect instruments to this unbalanced 1/4" (6.35 mm) jack.
●
7
Volume
Turn this knob to adjust the signal level. Twist it counterclockwise to the far
left to turn the volume all the way down and clockwise to the far right to
turn it all the way up.
Channel 4 (Aux + Bluetooth)
Connect stereo sources such as DJ consoles, CD/MP3 players or mixing
consoles to Channel 4 and use it to stream audio via Bluetooth. Channel 4
accepts and renders Aux and Bluetooth signals at the same time.
●
8
Input
Connect audio sources with high output levels such as a CD/MP3 player,
smartphone, DJ mixer or a computer to this unbalanced input consisting of
two RCA/cinch connectors.
24bit Digital Signal Processor
4 4
Line Mic Line Mic
5 5
1 2
3 3
POLAR 10
12
Master
13
Push
to edit
Instrument Aux +
7
3 4
6
Mix Out Sub
11
+10 dB
●
9
Volume
Turn this knob to adjust the signal level for both the Aux and Bluetooth
inputs. Twist it counterclockwise to the far left to turn the volume all the
way down and clockwise to the far right to turn it all the way up.
Heads up: When using the Aux input while streaming audio via
Bluetooth, balance the two signal levels by adjusting the Bluetooth
player's volume to match that of the incoming Aux signal.
●
10
Sub
Turn this knob to adjust the amount of bass. Twist it counterclockwise to
the far left to turn the bass all the way down and clockwise to the far right
to turn it all the way up. Turn the Sub knob to 0 dB to achieve a relatively
balanced volume between the column and the subwoofer.
Good to know: It is often a good idea to back off the bass slightly when
placing the subwoofer in a corner or in very small rooms. Reducing
the amount of bass also increases the system's peak volume without
triggering its limiter circuits.
●
11
Mix Out
This balanced XLR output provides a summed signal – that is, a mix of all
input channels' signals.
Heads up: Mix Out serves to forward the summed signal to an FOH
mixer, other speakers, monitors or recording device. You can also send it
another powered subwoofer if the unit has a high-cut or low-pass fi lter
to suppress high frequencies.
POLAR 10 1.1
9
8
10
0 dB
5