Switching On And Off Your Midland Btnext Pro - Midland BTNEXT PRO Manual De Instrucciones

Step 3.Then, tighten more the two screws in order to firmly fix the clamp in place on the
left side of the helmet.
If neccesary, you can use also the rubber plate in order to have more grip for the screw
clamp. Just use the two short screw to fix the rubber plate on the slide-in mount and
tighten the screw plate again.
Fitting and removing your Midland BTNEXT PRO
The BTNEXT PRO can be easily fitted onto the helmet by sliding it downwards on the
sliding mounting kit. BTNEXT PRO is maintained in position thanks to the fixing clip
located on the upper section (A).
To detach the BTNEXT PRO, simply press the fixing clip and push the unit upwards.
Aggancio
www.midlandeurope.com
Rubber Plate
Sgancio
A

Switching ON and OFF your Midland BTNEXT PRO

Switching the unit on:
Press and hold "Middle" button for approximately 3 seconds until the BLUE indicator
lights.
Switching the unit off:
Press and hold both "Middle" and "Backward" buttons together for approximately 3
seconds until the RED indicator flashes 3 times, thus lessening the chances that you
might turn off the unit accidentally (especially whilst wearing gloves).
Operative "mode"
The BTNEXT PRO can operate in three main "mode": Intercom, Phone and FM Radio.
The 3 multi function buttons can have different functionality depending on which mode
the unit is at that moment.
› In "Intercom mode" the three buttons let you manage the Intercom communications
between driver and passenger or bike to bike.
› In "Phone mode" you can manage your Bluetooth mobile phone to place/answer a
phone call or to listen to the music or GPS App. announcement (in stereo mode).
Please use your phone responsibly and safely.
› In "FM Radio mode" you can listen to your favourite radio station in stereo, seek for
a specific radio station and save it (6 memory are available).
You can switch (toggle) from one mode to the other simply pressing the Middle button
for 3 seconds. A voice announcement will tell in which mode you are on.
The toggle sequence is the following:
› Intercom mode (if another unit has been paired)
› FM Radio
› Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is the last used mode.
The Intercom mode and Phone mode are avalaible only if it was previously paired to
another unit or to a phone.
If you need to know in which mode the unit currently is, just press the "Volume + " and
"Volume –" button together. A voice announcement will tell you the current mode.
23