Publicidad
Idiomas disponibles
Idiomas disponibles
To stop the machine
Move the machine away from the cutting area and release either of the triggers to stop
it.
WARNING:
breaks and after finishing work.
CHANGING SPEED MODE (Fig. 6)
This machine features three speed
modes. The speed mode will change with
every press of the speed mode button.
The speed indicator will display the active
speed mode: one light for low speed, two
lights for medium speed, three lights for
high speed. The low speed mode provides
better control of the machine and longer
operating time per charge.
NOTICE:
The speed mode can be set before the machine is turned on OR during
operation.
When the machine is re-started after a break, the speed mode will return to the
previous speed.
BATTERY-STATUS INDICATOR AND SPEED INDICATOR (Fig. 6)
The battery-status indicator shows the charge level and the working status of the
battery pack, and the speed indicator shows the working status of the machine as
shown in the chart below. The battery-status indicator and the speed indicator will
illuminate when the machine is started OR the speed mode button is pressed.
56-VOLT LITHIUM-ION COMMERCIAL 21" SHORT POLE HEDGE TRIMMER — HTX5300-P/HTX5300-P-FC
Always remove the battery pack from the machine during work
6
Speed
Indicator
Battery-
status
Indicator
Bluetooth
Indicator
SPEED
Speed Mode
Button
23
®
Publicidad
