Publicidad
Idiomas disponibles
Idiomas disponibles
L-DESK RETURN AND ADJUSTABLE HEIGHT BASE ASSEMBLY CONTINUED
12. Check bottom of return leg frame (5) to determine
whether to use foot bracket with three holes (Q) or with
four holes (P). Align holes in foot bracket (P, Q) with
holes on return leg frame and foot (13). Depending
on foot bracket, insert three or four M6 x 16 mm
bolts (M) and tighten. (See Figure 16)
NOTE: Second person should keep return frame
lifted to correctly align the foot bracket.
Figure 16
M
M
P
5
13. Place programmable handset (7) on front edge of
return desktop (4). Attach using a drill and two
ST5 x 16 mm screws (O). (See Figure 17)
Figure 17
4
7
PAGE 7 OF 33
Q
P
M
13
13
O
14. Plug the programmable handset (7) and lifting
column cables into the control box. (See Figure 18)
Figure 18
R
10
9
7
Lifting Column Cables
Power Cord
15. Using three people, carefully rotate assembled
return toward the modesty panel and flip onto feet.
NOTE: It is recommended to hold the
return desktop and adjustable height base
simultaneously while flipping the unit for better
stability.
10
10
9
Handset
Cable
0323 IH-10357
Publicidad
