ADE Allegra Instrucciones De Operación página 15

Suggestions for changing the battery:
‚ A change of batteries becomes necessary when "Lo" appears on the
display, or when nothing at all is displayed.
‚ Only use the type of battery that is specified in the "Technical data".
‚ Always change all batteries at the same time.
‚ Dispose of old batteries in an environmentally appropriate way (see
"Disposal").
‚ Calibrate the scale, see "Setting up the scale".
Choosing the unit of measurement
The standard unit of measurement upon delivery is "kg" (kilogramme). However, the
measurement can also be displayed in the English unit of measurement "lb" (pounds).
1. To turn on the scale, briefly step on the weighing surface or press it.
2. Use the UNIT button on the back of the scale to set the desired unit of
measurement. Note the display.
Setting up the scale
1. Place the scale on an even, firm and dry surface. Do not place the scale on a carpet.
2. First, briefly step onto the middle of the weighing surface to calibrate the scale. As
soon as the display shows "0.0", calibration is complete.
This calibration must be performed after each battery change.
Weighing
WARNING against injuries
− Do not step onto the scale with wet feet or when its surface is damp.
Risk of slipping!
− Position yourself on the scale. Stand still and do not hold on to anything.
The measured weight will be displayed shortly thereafter.
A few seconds after you step off the weighing surface, the scale will switch off
automatically.
‚ Weigh yourself with as little clothing on as possible.
‚ Try to always weigh yourself at the same time and under consistent
conditions in order to obtain comparable values.
BE 2102 bathroom scale
Weighing
15