Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Intended Use
The DWST82800 and DWST82827 are designed for
professional storage applications. The DWST82800 is designed
to be mounted directly to a wall. The DWST82827 is designed
to be mounted onto the side of D
D
WALT floor cabinets that have nutserts built in.
e
DO nOT let children come into contact with this system.
Supervision is required when inexperienced operators use
this system.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
(Used without word) Indicates a safety related message.
SAFETY WARNINGS AND CAUTIONS
WARNING: DO NOT alter or modify the product
from the original design or function without
approval from D
fit. Personal injury and or property damage can result
from un‑authorized modifications.
WARNING: D
WALT metal rail is intended to be used
e
in temperatures of 14°F (-10°C) to 100°F (38°C).
WARNING: D
WALT metal rail is for indoor use
e
only. Keep out of direct sunlight.
Read and follow all safety warnings and installation
instructions before installation of this product. Failure to follow
warnings and instructions, which include exceeding the stated
load ratings on D
WALT metal rail and accessories, may cause
e
product or property damage.
1 . D
WALT metal rail is rated up to 100 lbs. per foot
e
evenly spaced depending on the mounting surface
and attachment method. If this limit is exceeded,
the product may fail, cause personal injury, or damage
product or property.
2 . Refer to the max load capacity listed for the hook
being used. If this limit is exceeded, the product may fail,
cause personal injury, or damage product or property.
WALT workbenches or
e
WALT. Other than cutting length to
e
3 . Installation of the DWST82800 on any surface other
than a wood frame, masonry, or concrete block wall
will reduce the load capacity of 100 lbs. per linear
foot and may cause the product to fail causing
personal injury, or damaging product or property.
4 . The DWST82827 has a load capacity of up to 50 lbs.
when installed on D
legs with nutserts built in.
5 . The DWST82827 has a load capacity of up to 30 lbs.
when installed on D
have nutserts built in.
6 . Follow mounting instructions appropriate for
the type of wall surface. Failure to do so will reduce
D
WALT metal rail load rating capacity and may cause
e
the product to fail, causing personal injury, or damaging
product or property.
7 . Install D
WALT metal rail using appropriate hardware
e
and in accordance with all local building codes.
8 . On a wood frame wall, or when mounting to drywall
over wood studs, D
WALT metal rail MUST be attached
e
to at least two studs, spacing of studs not to exceed 24".
9 . D
WALT metal rail must be mounted level.
e
10 . Do not mount D
WALT metal rail on ceiling.
e
11 . When hanging Dewalt accessories on D
metal rail, make sure the latching mechanism on
the bracket of the accessory is completely engaged
before placing any type of load on the accessory.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
Additional Safety Information
WARNING: Never modify this product. Damage or
personal injury could result.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•
lead from lead‑based paints,
•
crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from
chemically‑treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
Wear protective clothing and wash exposed areas
•
with soap and water. Allowing dust to get into your
WALT workbenches that have
e
WALT floor cabinet sides that
e
WALT
e
English
3
Publicidad
