Publicidad
Idiomas disponibles
Idiomas disponibles
If you want to restore the zero-weight function, proceed in the following way: remove all
foods from the scale. The "negative weight" symbol appears in the display. Push the "zero"
button, to restore the scale.
Note:
！
You can store nutritional data after every weighing process. Please refer to
the chapter Saving nutritional data in this manual.
Show nutritional data
1. Make sure your Ataller® Diet Kitchen Scale is in
weight mode. Press the "UNIT" button, if necessary.
The weight symbol ("WT") will appear on the display.
2. Place food items on the scale.
3. Look up the according three-digit food code from the
"Food code" chapter out of this manual.
4. Enter the code with the number keys of your Ataller® Diet Kitchen Scale, the code is shown
in the display corner. You can erase your entry by pushing the "CLR/ MC" button.
5. The scale shows you the following nutritional information:
KCAL: calories amount
SALT: salt amount
PROT: protein amount
FAT: fat amount
Saving nutritional data
You can store the measured nutritional data on the scale 's internal memory. Proceed in the
following way:
1. Scale a food item with its corresponding food code, as described in the chapter Show
nutritional data.
2. Press the "M+" button to store the information. The display reads "M01" for the first stored
nutrition information.
CARB: carbohydrates
CHOL: cholesterol amount
FIBR: Fiber
6
GB
Publicidad
