Descargar Imprimir esta página

Danby Designer DFF123C2WDD Guía De Utilización Y Cuidado Para El Propietario página 8

Ocultar thumbs Ver también para DFF123C2WDD:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions
OPERATING YOUR
REFRIGERATOR
Temperature
Température
Fig.2.
Fig.3.
OPERATING FREEZER
COMPARTMENT
Fig.4.
Freezer Temperature Control
REFRIGERATOR TEMPERATURE CONTROL
• There is a digital temperature display panel in the REFRIGERATOR
compartment (See Fig.2.). The digits on the upper line are in degrees
Celsius, while the bottom digits are in degrees Fahrenheit.
• Press the "-" sign or "+" sign to reach the desired temperature.
• The first time you turn the unit on, please select 2°C/36°F and let the
unit run for at least 2 hours before putting food inside. This will ensure the
refrigerator compartment is thoroughly chilled before food is put in. The
recommended factory setting is 4°C / 39°F.
NOTE:
• If the unit is unplugged, you must wait 3 to 5 minutes before restarting
the unit (plugging the unit back in). If you attempt to restart before 3 to 5
minutes, the refrigerator will not start.
• If the power goes out, the unit should restart itself when the power
FREEZER
comes back on.
Do not place
• Large amounts of food will lower the cooling efficiency of the appliance.
food near or
• Do not place food so that it blocks an air vent, and leave adequate space
around the
between food items for air flow in the cabinet (see Fig.3.)
vents or air
• Allow several hours for temperature to stabilize between two
duct
temperature selections.
• Selecting different temperatures on the refrigerator digital temperature
display, will affect the temperature in BOTH the fridge and the freezer
compartments.
FREEZER TEMPERATURE CONTROL
• Your refrigerator has one vent control for regulating the temperature in
the freezer compartment (See Fig.4.). The temperature control is located
on the center of the freezer compartment's interior back panel.
• The first time you turn the unit on, adjust the temperature control knob to
"MAX" and let the unit run for at least 2 hours before putting food inside.
This will ensure that the freezer cabinet is thoroughly chilled before food is
put in.
• The FREEZER temperature control ranges from "MIN" (the warmest) to
"MAX" (the coldest). Adjust this control to get the desired temperature.
The recommended factory setting is MEDIUM (half way between "MIN"
and "MAX").
THE FREEZER COMPARTMENT
• This compartment is designed for the long-term storage of frozen food.
Storage time period is up to three months.
• The storage life of frozen foods varies and the recommended storage
time should not be exceeded.
• Place frozen food into the freezer as quickly as possible after purchase.
If there are instructions on the package, carefully follow these
instructions regarding storage times.
6

Publicidad

loading