Adler europe AD 1185 Manual De Uso página 5

3. AUX mode:
Connect your external device to the AD 1185 by the AUX port.
Short press Mode Button (2)until AUX mode is selected.
Now you can play music from your external device.
All control can be done from the external device.
Only the AD 1185 volume level can be controlled from AD 1185 by the Play/Pause knob (1)
4. USB mode
Insert a USB Pendrive formatted in FAT32 format into the USB port (4) at the back of the device.
The device should detect the newly inserted USB Pendrive and start playing the first track on the device.
Please take note that AD 1185 supports only Mp3 format files.
5. SD card mode.
Insert an SD card formatted in FAT32 format into the SD port (5) at the back of the device.
The device should detect the newly inserted SD card and start playing the first track on the device.
Please take note that AD 1185 supports only Mp3 format files.
6. Changing port.
On the displays right upper corner, a battery charge state indicator is shown.
When full it shows the battery state as still not blinking
When low. Also, the device will signal the „Battery Low" signal. And the battery symbol will start to blink.
To charge the device insert a USB C cable into the charging port (6) connected to a 5V 1A power source to start charging the device.
7. Charging / Pairing indicator
The device has 2 icon colors at the indicator
Blue light flashing shows that the device is pairing
Blue light is stable and lit. The device is connected to another device via Bluetooth.
Red stable light. The device is charging.
Troubleshooting:
Problem: Device is not connecting via Bluetooth, the device is not showing on the list.
Solution: Make sure the AD 1185 is set on Bluetooth mode and is not connected to another device. Please check the back of AD 1185 if the
indicator light (7) is blinking or is stable in blue color. If it's stable. The device is connected to another device. If its blinking and
searching pleach check if your phone/computer/device is compatible with Bluetooth version 4.0.
Problem: The device does not start in USB/SD mode.
Solution: Please make sure the USB device is working on another USB reader. If yes then please check if the file format is set to FAT 32. If
not then please re-format the USB/SD device to FAT32 format. If the device is still not reading please check if the files on the USB/SD
are in Mp3 format.
Technical specification:
Output Power: 6W
5V 1A
Input power: DC
Bluetooth Version: 4.0.
File support: Mp3
Battery: 1800 mAh 3.7V
Battery Type: Lithium.
Loud Speaker: 2x5W
Max Power: 20W
FM: 87,5 - 108 MHz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the
environment. Do not dispose this appliance in the common waste bin.
5