Fujitsu L19T-1 LED Manual De Instrucciones página 7

Setting display of the OSD menu
Calling the OSD Setup setting window
Language Setting language for the OSD menu
With this function you choose between English (default setting), French, German,
Italian ，Portuguese, Russia, Spanish, Swedish, Turkish, Arabian, Czech, Danish,
Netherlands, Finnish, Norwegian, Polish as the language for the OSD menu.
OSD Setting the horizontal position of the OSD menu
H-Position
With this function you move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
OSD
V-Position
With this function you move the OSD menu up or down.
OSD Setting the display duration of the OSD menu
Timeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Setting functions in the "Advanced" menu
Calling the Advanced setting window
Activate/deactivate the ECO mode
ECO
On = the brightness of the picture is set to the ECO value at reduced power
Off = user adjusted brightness
ACR Activate/deactivare dynamic contrat ratio
On = dynamic contrast ratio dependent of the content of the picture
Off = static fixed contrast ratio
Activate/deactivate DDC-CI function
DDC-CI
On = the DDC-CI function is activated (default setting)
Off = the DDC-CI function is deactivated
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the MENU button to activate the function. The Auto Processing message is
displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
consumption
OSD-Description