Carpet-Bare Floor Selector
Sélecteur tapis/plancher
Selector Carpet-Bare Floor
Hose
"J" Slot
Tuyau
Fente en "J"
Manguera
Ranura en "J"
Brush
Brosse
Cepillo
Combination
Brush
Suceur combiné
Cepillo para
combinación
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Using Tools
Extension Wand
Tube
Tubo extensión
Raised Tab
Saillie
Lengüeta saliente
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Extension Wand
Tube
Tubo extensión
Hose
Tuyau
Manguera
➢ ➢ Always place carpet-bare floor
selector in BARE FLOOR (TOOLS)
position when using tools.
➢ ➢ Remove wand from holder by
twisting and pulling up.
➢ ➢ The tools can be attached to hose,
wand(s) or crevice tool.
➢ ➢ For extended reach, connect the
extra wand to extension wand and
hose. Firmly push wands together
for secure fit.
➢ ➢ DO NOT overextend your reach with
hose as it could tip vacuum.
➢ ➢ The Crevice Tool may be used on the
following items:
• Furniture
• Cushions
• Drapes
• Stairs
• Walls
➢ ➢ The Combination Brush may be used
on the following items:
• Furniture
• Drapes
• Stairs
• Walls
Note: Always clean tools before using
- 28 -