Intended Use - blum SERVO-DRIVE Manual De Usuario

Intended use

SERVO-DRIVE for AVENTOS supports the opening and closing of lift systems and/or the opening of
drawers, and may only be used under the following conditions:
• In dry, enclosed rooms�
• In combination with AVENTOS lift systems and/or pull-out systems from Julius Blum GmbH within
permitted technical specifications�
• In combination with a Blum transformer�
Technical data specifications can be found in the Blum sales documentation�
For more information, please see your distributor�
Julius Blum GmbH is not liable for any other use�
Structural changes and spare parts
Structural changes and replacement parts not approved by the manufacturer affect the safety and
functionality of SERVO-DRIVE and are, therefore, not allowed�
• Only use original spare parts from Julius Blum GmbH�
• Blum components are the only devices that should be connected to the Blum transformer�
• Only competent persons may install/replace Blum components, modify the position of
the Blum transformer or modify the cabling�
• Please make sure that the Blum distance bumper is attached to the front�
NOTE
To ensure that lift systems and/or drawers cannot be activated unintentionally, we recommended con-
necting the Blum transformer to a switched outlet� For more information, please consult an electrician�
EN
5