Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Insert the supplied extraction keys into this
product, as shown in the figure, until they click
into place. Keeping the keys pressed against the
sides of this product, pull this product out.
DIN Rear-mount
7 Installation using the screw holes on
the side of this product
1. Remove the frame.
Pull out to remove the frame.
(When reattaching the frame, point the side with
a groove downwards and attach it.)
29
2. Fastening this product to the factory radio
Frame
mounting bracket.
Select a position where the screw holes of the
bracket and the screw holes of this product
become aligned (are fitted), and tighten the
screws at 2 places on each side. Use any of
binding screws (4 × 3 mm), binding screws
(5 × 6 mm) or flush surface screws (5 × 6 mm),
depending on the shape of the screw holes in the
bracket.
*1 Use binding screws (4 × 3 mm) only.
* 1
Dashboard or Console
Factory radio mounting bracket
* 1
Screw
Publicidad
