Descargar Imprimir esta página

Bosch HCP3 651UC Serie Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the metal grease filter
• ,
WARNING
RISK OF FIRE
Grease deposits
in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance
without the grease
filter.
Notes
o Do not use any aggressive, acidic or alkaline cleaning
agents.
o When cleaning the metal grease filters, also clean the
metal grease filter holder in the appliance with a moist
cloth.
o You can clean the metal grease filters in a dishwasher
or by hand.
In the dishwasher:
Note: Slight discoloration
is possible when cleaning the
dishwasher. This does not affect the metal grease filter's
functioning.
o Do not clean extremely dirty metal grease filters with
dishes.
o Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
o Soak the metal grease filters in hot soapy solution.
o Use a brush for cleaning and then rinse the filters well.
o Allow the metal grease filters to drip dry.
Uninstalling
metal grease filter
1. Open the latch and fold down the metal grease filter.
Simultaneously
use your other hand to grasp under
the metal grease filter.
2. Remove the metal grease filter from its mounting.
Notes
o Grease can gather in the bottom of the metal
grease filter.
o Hold metal grease filter horizontally to prevent
grease from dripping.
3. Clean metal grease filter.
Installing
metal grease filter
1. Insert metal grease filter.
Simultaneously
use your other hand to grasp under
the metal grease filter.
2. Flip metal grease filter up and snap the latch into
place.
Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
• ,
WARNING
RISK OF ELECTRIC SHOCK
Improper repairs are dangerous.
Only an after-sales
technician trained by us may perform repairs and
may replace damaged
connecting
leads. Remove
the mains plug or deactivate the fuse in the fuse box
if the appliance
is defective. Call after-sales service.
Disruption
Appliance
is
not working
Lighting not
working.
Possible
Solution
cause
Power outage
Check whether other
kitchen appliances are
working
Fuse
Check in the fuse box
defective
whether the fuse for the
appliance
is in working
order
Bulbs
Replace bulbs, see
defective,
chapter "Replace Bulbs."
10

Publicidad

loading