LG CMS8520F/W Manual De Usuario página 18

18 Operating
Radio Operations
Be sure that both FM and AM aerials are connected.
(Refer to the page 13)
Listening to the radio
1. Press TUNER on the unit or FUNCTION on the
remote control until FM or AM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUNING-/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
3
Press TUNING-/+ repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Or
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press TUNER on the unit or FUNCTION on the
remote control until FM or AM appears in the
display window.
2. Press TUNING-/+ on the remote control or
Y/U on the unit to select a desired
frequency.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESET.FOLDER W/S to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds.
"ERASE ALL" will flash up on the unit display.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press T ST./MONO on the unit or d/M on the
remote control. This will change the tuner from
stereo to mono and usually improve the reception.