Advanced Operations
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device.
(Refer to the page 12)
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
AUX/PORT. IN on the unit.
4. Turn the portable player or external device and
start it playing.
Changing the lighting effect
You can change the unit's lighting effects by
pressing LIGHTING EFFECT on the unit in 5 types.
(Forward Level Mode -> Peak Level Mode -> Center
Level Mode -> Reverse Level Mode -> Shower Level
Mode)
Woofer ON/OFF
You can power on or off the woofer by pressing
WOOFER ON/OFF on the unit.
,
Note
Woofer sound is not outputted in AM function.
And WOOFER ON/OFF button's light is turned
off.
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, PORTABLE, FM, AM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD, USB, TUNER, or AUX/PORT. IN on
the unit or FUNCTION on the remote control.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
(Refer to the page 16)
USB REC on the unit or USB REC on
3. Press
the remote control.
- If you connect both of USB1 and USB2, press
T ST./MONO to record to USB1 or press I
to record to USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
To select recording bit rate and
speed
USB REC on the unit or USB REC on
1. Press
the remote control for longer than 3 seconds.
2. Press C/V on the remote control or
Y/U on the unit to select a bit rate.
USB REC on the unit or USB REC on
3. Press
the remote control again to select the recording
speed.
4. Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed.
(AUDIO CD
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
Operating
21
3
only)