Control
panel
features
(cont.)
NOTES:
• If you have entered all settings for a function
but do not touch START/ENTER in 5 seconds,
the START? indicator light will show.
• If you open the door while the oven is on and
then shut the door, the START? indicator light
will show. Touch START/ENTER to continue.
• If you choose a function but do not press
another command
pad within 1 minute, the
display returns to the time of day and you
have to start over.
Audible
signals
Your microwave oven comes with audible
signals that can guide you when setting and
using your oven:
• _
A programming
tone will sound each
time you touch a pad.
, _-J
One long tone signals the end of a
I
Kitchen Timer countdown.
•
Four t ones
s ignal
theend
of a cooking cycle.
' [_[_J
Two quick, short tones sound once
every minute for the first 15 minutes after an
end-of-cooking
signal as a reminder if the
food has not been removed from the oven.
, [_]
Two quick, short tones will sound
while entering and exiting from a hidden fea-
ture (for example, Child Lock) or time of day.
.
Three tones sound if you have
made an incorrect entry.
To disable the programming
tone:
TOUCH
r
and hold for 5 seconds
To turn the programming
tone back on:
TOUCH
and hold for 5 seconds
To disable all audible signals except the
end-of-timer
signal:
TOUCH
K?D
and hold for 5 seconds
To turn signals back on:
TOUCH
and hold for 5 seconds
NOTE: Two tones will sound when audible signals
are turned on or off.
Interrupting
cooking
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan stops,
but the light stays on. To restart cooking, close the
door and
TOUCH
If you do not want to continue cooking:
' Close the door and the light goes off.
OR
' TOUCH
h'OTE: Before setting a function, touch
OFF/CANCEL to make sure no other
function is on.
continued
on next page