Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING
THE FREEZER DRAWER LEVEL
Adjustment
part
J
Freezer Drawer
1. Locate the height-adjuster
( 1 ) in the freezer drawer.
Unscrew
the 8 Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller
screw( 3 ) with a Phillips screwdriver(+).
%
3. Find the best level to align the door slope.
Example)The slope is about 0.08inch(2mm)as shown below.
- Rotatethe height adjuster to -2.0 to reduce the door slope.
Reference
plane--,
After adjustment,
tighten the controller screw ( 3 ) and then philips screws.
Setti_g up 17
Publicidad
