ARDES AR5S31 Folleto De Instrucciones página 13

5
4
1. Screws (4 pieces)
2. Base
3. Main body
4. Control panel
5. Motor shaft
6. Oscillation knob
7. Safety screw
1. Mount the base on the main body fixing it with
the 4 screws provided as shown in figure.
2. Unscrew the locking ring of the rear grille
(11) from the motor shaft (5) by turning it
counterclockwise.
3. Insert the rear grille (12) on the motor shaft
(5) making sure that the handle on the back is
facing upwards and the locking pins (A-B) are
in the vertical holes of the rear grille. Screw
the locking ring (11) by turning it clockwise.
4. Insert the fan (10) on the motor shaft (5) and
fasten the proper lock ring (9) by rotating counterclockwise.
5. Loosen the safety screw (7) of the closing ring (14) and place it on the
rear grill (12).
6. Position the front grille (8) on the rear one (12) and so that the ring
hooks it.
7. Once you have found the right position, tighten the safety screw (7).
ASSEMBLING
6
3
14
7
2
1
9
5
10
12
11
8
8. Front grille
9. Lock ring of the fan
10. Fan
11. Lock ring of the back grille
12. Back grille
13. Motor
14. Lock ring
A-B. Locking pin for the rear grille
B
6
A
13
13