cecotec CONGA ROCKSTAR DEEPCLEAN JALISCO Manual De Instrucciones página 49

4. OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
- Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
Using the vacuum cleaner
- Press the power button to turn the vacuum cleaner on or off.
- Press the speed dial repeatedly to select the device's operating speed: Eco and Turbo. The
device will turn on in Eco mode by default.
Attachments
This device includes different accessories that allow cleaning different types of surfaces,
objects, and dirt. Some of them are suitable for the upright vacuum cleaner, and others are
preferably used with the handheld one.
Jalisco brush
Assemble this brush to the upright vacuum cleaner. This brush is especially designed for
cleaning hard floors, but can be used to efficiently clean soft floors too.
2 in 1 accessory
This accessory is preferably used with the handheld vacuum cleaner and allows cleaning
furniture without damaging it.
Accessory for corners
This accessory is preferably used with the handheld vacuum cleaner to reach less accessible
dirt in corners.
Installing the wall bracket
Fig. 5
1. Place the wall bracket on the wall and mark the points where the holes are to be drilled
to fix the bracket. It is important that the suction base rests on the floor so that the wall
bracket does not support the full weight of the vacuum cleaner.
2. Drill the 3 holes (previously marked) and insert the pegs and screws.
3. Make sure that the charging base is securely fixed to the wall and place the vacuum
cleaner on the bracket, inserting the charging terminals of the vacuum cleaner into the
charging terminals of the bracket (plastic tab).
4. Once the wall bracket is installed, connect the power adapter to the charging port, and
then you can charge the vacuum cleaner by simply sliding it up and down the wall bracket.
CONGA ROCKSTAR DEEPCLEAN JALISCO
ENGLISH
49