Plustek OpticFilm 120 Guía Rápida página 9

Before Installing the Scanner
Connecting the Scanner to Your Computer
Please allow about 12cm of space behind the scanner to open the
Attention
Protection Cover.
Plug the power adapter into the scanner's power receptor.
Plug the other end of the power adapter into a standard AC power outlet.
Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
Plug the rectangular end of the USB cable to the USB port on the back of your
computer.
Note: If there is another USB device connected to the computer, connect the
scanner to an available USB port.
Attention Please DO NOT power on the scanner now.
9