Descargar Imprimir esta página

identités RS2 Manual De Instrucciones página 14

Manillar de transferencia estática

Publicidad

Idiomas disponibles

Idiomas disponibles

service user in a traditional method. Your method of applying a counterweight should be reviewed and approved during
your risk assessment.
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
• Clean the product regularly with lukewarm water and a soft cloth. Do not use abrasive products, detergents or solvent-based
products.
• Dry with a clean, dry soft cloth.
Before each use, check :
o Shin guard height adjustment
o Brakes and castors are in good working order
o General condition of foam parts
• In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must
be inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Respect the conditions for storing and storing your product.
In a dry and temperate place
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
All components must be stored without any load (do not place any objects that are too heavy on the product elements,
do not jam anything...).
PERIOD OF USE
The life expectancy of this product is 6 years under normal use, safety and maintenance conditions for a user. Beyond this
period, the product can be used for as long as it is still in good condition.
If the device is used in a multi user environment (such as a nursing home or hospital) then service life may be reduced.
Version Juin 2023
14

Publicidad

loading

Este manual también es adecuado para:

815198