Publicidad
Idiomas disponibles
Idiomas disponibles
should be kept away from charger cavities.
Always unplug the charger from the power supply
when there is no battery pack in the charger or
before attempting to clean.
MAINTENANCE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your tool requires no additional lubrication or
maintenance. Never use water or chemical cleaners
to clean your tool. Wipe clean with a dry cloth.
Always store your tool in a dry place.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1. I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery pack can be inserted into the charger
only in one direction. Turn the battery pack
around until it can be inserted into the slot, the
indicator light should be green and flash when
EN
the battery pack is charging.
2. REASONS FOR DIFFERENT CHARGING
TIMES
The charging time can be affected by many reasons
which are not defects in your product.
a) If the battery pack is only partly discharged it
may be re-charged in less than rated charging
time.
b) If the battery pack and ambient temperature are
very cold/ hot, it may take longer to re-charge.
Please find an appropriate environment with
proper air temperature to start charging.
TECHNICAL DATA
Rated input voltage
Rated input power
Output
Charge battery
Charging time (approx.)
2.0 Ah (1 pc)
2.0 Ah (2 pcs)
6
Protection class
Machine weight
For the technical data of the types, the number of
cells and the rated capacity of the batteries that
can be charged, please refer the nameplate of the
battery pack supplied by manufacture.
FCC PART 15
SUPPLIER'S DECLARATION
OF CONFORMITY
Product Description : Kress Battery Charger
Model Number : KAC15
Trade Name : Kress
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Responsible Party :
Positec USA, Inc.
10130 Perimeter Parkway, Charlotte, NC 28216
USA
Tel.: (704) 599-3711
Fax: (704) 599-6390
120 V~60 Hz
380 W
20 V
DC, 15 A
Li-Ion
20 mins
40 mins
4.0 Ah (1 pc)
4.0 Ah (2 pcs)
8.0 Ah (1 pc)
8.0 Ah (2 pcs)
3.3 lbs (1.5 kg)
20 mins
40 mins
32 mins
64 mins
/II
Publicidad
