Publicidad
Idiomas disponibles
Idiomas disponibles
GEAppliances.com
To maintain optimum performance, clean the filter at least every 50
days.
Air Filter
Dirtyfilter--Needs cleaning
Clogged filter--Greatly
reducescooling,heating
and airflow.
To remove the air filter, on other models:
Pull it down.
Tum the air conditioner off before cleaning.
The most important thing you can do to maintain
the air conditioner is to clean the filter at least
every 30 days. A clogged filter reduces cooling,
heating and air flow.
Keeping the air filter clean will:
[] Decrease cost of operation.
[] Save energy.
[] Prevent clogged heat exchanger coils.
[] Reduce the risk of premature component failure.
To clean the air filters:
[] Vacuum off the heavy soil.
[] Run water through the filters.
[] Dry thoroughly before replacing.
To remove the air filter, on some models:
Carefully pull the tab forward, up and out.
To replace the air filter'.
Replace the clean filter by pushing it back
into place.
N0 7"1CE: 00 not
operate
the air
conditioner without the filter in place. If a filter
becomes torn or damaged it should be replaced
immediately.
Operating without the filter in place or with a
damaged filter will allow dirt and dust to reach
the indoor coil and reduce the cooling, heating,
airflow and efficiency of the unit.
Replacement filters are available from your
salesperson, GEdealer, GE Service and Parts Center
or authorized Customer Care®servicers.
How to Insert
the Batteries
in the Remote
Control
r_
Removethe battery cover by sliding it
according to the arrow direction.
[-2-] Insert new batteries making sure that the
(+)and (-) of battery are installed correctly.
E
eattach the cover by sliding it back
into position.
NOTES:
[]
Use 2 AAA (!.5 volt) batteries. Do not use
rechargeable batteries.
[]
Removethe batteries from the remote control
if the system is not going to be usedfor a long
time.
ll
Publicidad
