HPA-Faip M 424 Uso Y Mantenimiento página 54

Place the wheel on the table top (with
the narrow part of the rim structure facing
upwards), push lightly downwards and
use the control pedal to lock the wheel
in position (fig.14a).
- Tilt the tower forward again (fig.15).
Release the locking knob to free both the
vertical slide and the swing arm (fig.15a)
54
and to set the mounting/demounting
device in the correct position against the
edge of the rim (fig.16).
14A
15
IMPORTANT: Operating the knob, this
will simultaneously lock both the vertical
slide and the swing arm, with the mount-
15A
16
M 424 - M 424 FS