Publicidad
Idiomas disponibles
Idiomas disponibles
C)po ncj
F
Door F ofrcjo o
CONTROLLING
THE TEMPERATURE
Controlling
the fridge temperature
The fridge temperature
can be set between
46°F and 34°F to suit your particular needs. Press the fridge
button repeatedly
until the desired temperature
is shown in the temperature
display. The temperature
will move 2°F degrees each press(38°F
_ 36°F _ 34°F _ 46°F _ 44°F _ 42°F _ 40°F _ 38°F). The
temperature
control process for the fridge works just like the freezer process.
Press the fridge button to
set your desired temperature.
After a few seconds,
the fridge will begin adjusting
towards
the newly set
temperature.
This will be reflected
in the digital display.
Using the Power Cool
For a quick Fridge cool down, use the Power
Cool function.
Press
and hold the Fddge / Power
Cool (3 sec) button for 3 seconds.
Then, the power cool indicator will light and activate the power
cool mode independent
of fridge set temperature.
If you select
Power
Cool, the inside temperature
of the fridge will decrease for
about two and a half hours or until 25°F is reached.
Press and hold
the button for 3 seconds
again to cancel the Power
Cool mode.
Then, the indicator will go out and the Refrigerator
will return to the
set temperature
again.
Freezer
Ice
Water
The temperature of the Freezer, fridge or Pantry Room may rise
when you open the doors too frequently, or if a large amount of
warm or hot food is placed inside.
This may cause the digital display to blink. Once the Freezer and
fridge temperature return to their normal set temperatures, the
blinking will stop.
If the blinking continues, you may need to "reset" the Refrigerator.
Try unplugging the appliance, wait for around 10 minutes and then
.........................................................................................................
_:,
plug the power cord back in.
If there is an communication error between the Display and Main Controller, the Pantry Display light may blink.
Once the normal set temperatures are reached, the blinking will stop.
If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.
USING THE COLD WATER DISPENSER
Press the ice / Water button to select the type of you want
f
Cubed
Crushed
Water
No ICE
Select this if you
want to turn ice
maker off.
Publicidad
