Publicidad
52
Funcionamiento a medida de la energía con AI y
comprobación práctica
• AI energy target control is a function that allows the user to set the
desired Energy usage.
- The AI algorithm analyzes past Energy usage and assists the user
to consume as much power as the amount set.
- The value displayed on the wired remote control is Energy usage of
the entire system.
- If a target Energy usage is much smaller than the daily average
Energy usage over the past 30 days is set, the target Energy usage
may be exceeded.
The target amount of power consumption setting can be reached if
it falls between approximately 50% to 100% of the average Energy
usage over the past 30 days. (0~50% based on the savings rate)
Ejemplo) Si el consumo medio diario es de 100 kWh, el ahorro
podría no superar los 50 kWh, incluso si el objetivo de
consumo de energía se fija en 20 kWh.
No se aconseja establecer un objetivo de consumo inferior
al 50 % de la media diaria de energía utilizada en los 30
días anteriores.
- Utilícelo sólo como referencia, ya que podría diferir ligeramente de
la cantidad real de energía utilizada.
- Si el nivel de consumo de energía deseado por el sistema es
demasiado bajo, el rendimiento de la refrigeración/calefacción
podría verse afectado.
- Si se excede, la cantidad máxima de consumo de energía que se
puede mostrar, 99999 kWh, se recalcula a partir de 00000 kWh.
• Consulte el manual de usuario/instalación del mando a distancia con
cable para obtener instrucciones de ajuste específicas (RS3).
AI indoor space car
• The AI indoor space care is a function that makes the space
comfortable by carrying out cooperative operation with surrounding
indoor units when the desired temperature is not reached due to
ambient heat load even though 100% of the heating and cooling
capacity of the indoor unit is being used.
- The AI indoor space care function finds surrounding indoor units
providing through AI field learning.
It needs at least two weeks as the learning period, and additional
learning periods may be required depending on the operation
method and environment at the installation site.
- Es posible hacer funcionar hasta dos unidades interiores con
funcionamiento AI de cuidado del espacio interior.
- When carrying out smart care operations after setting the AI indoor
space care operation, the AI indoor space care operation is possible
through learning.
- During AI indoor space care indoor units may be automatically
turned on and off as a result of learning.
If you do not wish to use the AI indoor space care function, set it to
"disabled".
- If an AI indoor space care indoor unit is searched incorrectly and an
unwanted indoor unit is turned on and off due to incomplete (in
progress) AI field training, set the AI indoor space care operation
setting to "disabled" and carry out operations correctly for
additional field learning.
• Consulte el manual de usuario/instalación del mando a distancia con
cable para obtener instrucciones de ajuste específicas (RS3).
AI Smart diagnosis
• The smart diagnosis is a function that generates an AI Smart
diagnosis report after analyzing the operation status of the system
and carrying out failure diagnosis by applying an AI diagnosis
algorithm.
- The AI Smart diagnosis report can be published through LGMV and
is saved as a file. A normal value can be viewed only by opening the
saved report file using Chrome. (Internet Explorer is not supported.)
- Los resultados del diagnóstico pueden tener errores por cuestiones de
ciclo o componentes defectuosos. A la hora de tomar decisiones,
tenga en cuenta todos los resultados del diagnóstico de fallos.
How to publish a LGMV AI smart diagnosis report
Precauciones de uso
!
• The AI engine function may not be displayed/work in some products
not installed.
• In cases of models for both cooling/heating, if the simultaneous
operation of both cooling/heating is working, the AI engine function
is not available.
• The AI engine function can operate both pleasant operation and
power saving functions at the same time.
• If you feel that the cooling and heating performance is weak when AI
smart care is set, you can increase the cooling and heating
performance by turning off AI smart care function.
• Set the accurate date and time on the wired remote control and the
central controller before the AI engine Functions.
- Si la fecha y la hora no están ajustadas, podría aparecer un valor de
resultado incorrecto.
• La configuración de la hora del motor AI se ajusta a los valores de
fecha y hora más recientes.
Publicidad
