Publicidad
Idiomas disponibles
Idiomas disponibles
EDGING
The trimmer attachment
can be used for edging (Fig. 12).
Alternatively, bladed lawn edger attachments
can also be purchased
for use with this unit.
Rotating the Trimmer Attachment
_
WARNING:
To avoid serious personal injury and
I
I
damage to the unit, shut the unit off before rotating the
1
attachment.
When edging around sidewalks, flowerbeds, etc., rotate the trimmer
attachment 90 ° inside the coupler. DO NOT rotate the entire unit 90 °.
1. Turn the knob counterclockwise
to loosen the coupler (Fig. 4).
Refer to Operating the Coupler in the Assembly section.
2. Press and hold the release button (Fig. 6).
3. Rotate the attachment
until the release button snaps firmly into
the 90 ° edging hole (Fig. 13).
4. Turn the knob clockwise to tighten the coupler (Fig. 4).
CAUTION:
Only snap the release button into the 90 °
edging hole when edging with the trimmer attachment.
Using the 90 ° edging hole with other attachments
could
lead to personal injury or damage to the unit.
Maintaining the Trimming Line
Hard surfaces, such as sidewalks, can cause the trimming line to
wear down quickly or break.
•
Frequently check the trimming line length. Replace the trimming
line as needed. Refer to Replacing the Trimming Line.
DO NOT force the unit. Make shallow cuts in as many passes as are
necessary to achieve the desired depth. Cut at a slow, even pace.
Fig. 12
Release
Hole
Fig. 13
12
Publicidad
