Installing Roll Paper; Inserting Slip Paper - Epson TM-J8000 Manual Del Usuario

English

Installing Roll Paper

CAUTION:
Read the caution label on the printer,
and be careful not to touch the
autocutter blade when you open the
roll paper cover.
1. When the printer is not
receiving data, open the roll paper cover by pulling the paper
cover release lever (shown in illustration
pushing the cover back.
2. Remove the used paper core, if
there is one.
3. Insert paper as shown in
illustration
correct direction that paper
should come off the roll.
4. Pull out a small amount of paper,
close the cover, and tear off the
extra paper by pulling it toward
the front of the printer. See
illustration

Inserting Slip Paper

Note:
Be sure the paper is flat, without curls,
folds, or wrinkles.
To prevent jams, roll paper must be
installed when printing on slip paper.
When you insert slip paper, be sure
that the right side of the paper is
against the right side of the paper
guide, as shown in illustration
6 TM-J8000 User's Manual
. Be sure to note the
4
.
5
3
5
—
.
6
3
) forward and then
4
–
6