18
your unit.
Before going through the check
list below, refer to the operating
procedures.
General
Problem
Cause/Solution
No sound
° Adjust the volume with C4).
e Set the fader control to the centre
position on the 2-speaker
system.
Indications do not appear on
Remove the front panel and clean
the connectors. See "Cleaning
the display window.
the Connectors" of "Maintenance"
for details.
Tape playback
Problem
Cause/Solution
Playback sound is distorted.
Contamination of the tape head.
Clean the head.
The AMS does not operate
e There is a noise in the space between
tracks.
correctly.
e A blank space is too short (less
than four seconds).
2 Pl on CEEEKIAMS) is pressed immediately
before the
following track.
e Kd on
is pressed immediately after the track
starts.
e A long pause, or a passage of low
frequencies or very low